DENON Owners Club Thread .... Join In

teetertotter · 02-13-2017, 07:18 AM

My AVR-S910W Denon is hooked up to the internet via wireless and last night I finally got around to testing the internet radio station portion of the unit. I spent about an hour going through most of the internet radio stations to set up my favorites list.

xnappo · 03-19-2017, 07:56 AM

Quote:

Originally Posted by coyote

After a bit of work, AVRdroid is not the way. It opens but never closes its telnet connection, thereby clobbering Denon' s own app. Better path is the send/expect Tasker plugin, which sends telnet commands then disconnects immediately.

@coyote - can you please post an example of using send/expect ? I am currently using send/expect for my TPLINK switches, but an using AVRDROID for my Denon. I would like to get rid of it though as I don't like relying on another app.

xnappo

xnappo · 03-19-2017, 08:14 AM

Oh wow - I was making that WAY too hard. The TPLINK I am using was complex, the Denon is simple.

For the sake of posterity, to use the tasker send/expect plugin with the Denon, simply configure the command like this:

Code:

Target: [Your Denon's IP address]
Port: 23
Timeout: 10
Send: [Command]\0x0d

Example for volume up:

Code:

Send: MVUP\0x0d

I can't post links yet (joined to ask this question) but just google 'denon protocol pdf' for the spec.

Widetracker · 03-30-2017, 10:39 PM

Hi, I'm trying to use a Bose AM3 speaker system in Zone 2 with this receiver (passive sub with pass through to two cubes). I've connected RCA inputs to the receiver (in addition to the HDMI connection) from my Oppo BD95 Bluray/CD player for the Zone 2 output since it only accepts analog. The L & R speaker outputs to Zone 2 are coming from the the Denons SURROUND Back/AMP Assign terminals as they should, but here's the rub...I only get music from the sub and one cube during playback? I've double checked both the connections at the reciever and the sub, even swapped the cubes but nothing found? Even when I selected the CD source (analog) for the Main Zone, only one front speaker and the sub in my 5.1 setup will play? Any ideas about what is causing this issue and how it can be resolved?

Ps. I didn't see any buttons to actually start a new thread for this subject? Have I missed something??

Thanks,

Dave

Widetracker · 04-02-2017, 12:14 PM

..found I still had Zone 1 configured with center rear speaker from previous setup, which was using one channel of the Zone 2 connections (doh!).

My Bose 3 piece system works fine in Zone 2 (passive sub with two satellites), now wondering how the Tone controls and LPF should be set and how this actually affects the frequencies and amp loads?

ant7701 · 05-09-2017, 08:29 PM

Hey, I just picked up a pre owned AVR-X1100w. Got everything set up last night. This is my first modern style receiver and I'm a bit confused. Is there any loss in picture quality when using the HDMI pass thru? I tested out a few blue ray movies and they looked a bit off, it could be my eyes playin tricks on me. Using high speed hdmi cables. Thru the blue ray slot. Is there a setting for resolution or anything that I'm missing? Or does it auto detect because it's a blue ray? And the same question goes for the sound options. When listening to "tv audio" I can scroll thru Dolby digital or dts and all the options, but when listening thru an HDMI source like blue ray or sat/cbl box...I can only scroll thru stereo, multi channel stereo, mono movie, or virtual. Does the receiver automatically detect which types of audio are available? Or am I missing something?

KevinEber · 02-17-2018, 01:10 PM

Greetings!

I'm new to this thread, so please forgive me if this topic has come up before. I'm trying to connect an ancient Technics SL-Q350 to my new AVR-X2400H, so of course I'll need a pre-amp. However, I found that it's difficult to find quality phono pre-amps online. I ended up getting a GOgroove model GGAAPPA100BKUS from Amazon, and the sound quality is terrible. Can anyone suggest a high-quality preamp that will make my albums sound the way they're supposed to, or should I just go with a new turntable with a built-in preamp? I hate to let go of my old Technics, even though the cover hinges broke long ago ...

Thanks,
Kevin

teetertotter · 02-17-2018, 04:10 PM

Welcome Kevin...
You might try here: https://www.audioasylum.com/index.htm

02-13-2017, 07:18 AM	#226
teetertotter CASA Volunteer Join Date: Jan 2016 Location: Janesville, WI Posts: 145	My AVR-S910W Denon is hooked up to the internet via wireless and last night I finally got around to testing the internet radio station portion of the unit. I spent about an hour going through most of the internet radio stations to set up my favorites list. Last edited by teetertotter; 05-10-2017 at 06:21 AM..

03-19-2017, 08:14 AM	#228
xnappo What is HD? Join Date: Mar 2017 Posts: 2	Oh wow - I was making that WAY too hard. The TPLINK I am using was complex, the Denon is simple. For the sake of posterity, to use the tasker send/expect plugin with the Denon, simply configure the command like this: Code: Target: [Your Denon's IP address] Port: 23 Timeout: 10 Send: [Command]\0x0d Example for volume up: Code: Send: MVUP\0x0d I can't post links yet (joined to ask this question) but just google 'denon protocol pdf' for the spec. Last edited by xnappo; 03-19-2017 at 08:18 AM..

03-30-2017, 10:39 PM	#229
Widetracker What is HD? Join Date: Mar 2017 Posts: 2	Denon 2312CI Zone 2 issue Hi, I'm trying to use a Bose AM3 speaker system in Zone 2 with this receiver (passive sub with pass through to two cubes). I've connected RCA inputs to the receiver (in addition to the HDMI connection) from my Oppo BD95 Bluray/CD player for the Zone 2 output since it only accepts analog. The L & R speaker outputs to Zone 2 are coming from the the Denons SURROUND Back/AMP Assign terminals as they should, but here's the rub...I only get music from the sub and one cube during playback? I've double checked both the connections at the reciever and the sub, even swapped the cubes but nothing found? Even when I selected the CD source (analog) for the Main Zone, only one front speaker and the sub in my 5.1 setup will play? Any ideas about what is causing this issue and how it can be resolved? Ps. I didn't see any buttons to actually start a new thread for this subject? Have I missed something?? Thanks, Dave

04-02-2017, 12:14 PM	#230
Widetracker What is HD? Join Date: Mar 2017 Posts: 2	Denon2312 Zone 2 8ssue resolved ..found I still had Zone 1 configured with center rear speaker from previous setup, which was using one channel of the Zone 2 connections (doh!). My Bose 3 piece system works fine in Zone 2 (passive sub with two satellites), now wondering how the Tone controls and LPF should be set and how this actually affects the frequencies and amp loads?

02-17-2018, 01:10 PM	#232
KevinEber What is HD? Join Date: Feb 2018 Posts: 1	Pre-amp options for AVR-X2400H? Greetings! I'm new to this thread, so please forgive me if this topic has come up before. I'm trying to connect an ancient Technics SL-Q350 to my new AVR-X2400H, so of course I'll need a pre-amp. However, I found that it's difficult to find quality phono pre-amps online. I ended up getting a GOgroove model GGAAPPA100BKUS from Amazon, and the sound quality is terrible. Can anyone suggest a high-quality preamp that will make my albums sound the way they're supposed to, or should I just go with a new turntable with a built-in preamp? I hate to let go of my old Technics, even though the cover hinges broke long ago ... Thanks, Kevin

05-09-2017, 08:29 PM	#231
ant7701 High Definition is the definition of life. Join Date: Nov 2007 Posts: 36	Hey, I just picked up a pre owned AVR-X1100w. Got everything set up last night. This is my first modern style receiver and I'm a bit confused. Is there any loss in picture quality when using the HDMI pass thru? I tested out a few blue ray movies and they looked a bit off, it could be my eyes playin tricks on me. Using high speed hdmi cables. Thru the blue ray slot. Is there a setting for resolution or anything that I'm missing? Or does it auto detect because it's a blue ray? And the same question goes for the sound options. When listening to "tv audio" I can scroll thru Dolby digital or dts and all the options, but when listening thru an HDMI source like blue ray or sat/cbl box...I can only scroll thru stereo, multi channel stereo, mono movie, or virtual. Does the receiver automatically detect which types of audio are available? Or am I missing something?

02-17-2018, 04:10 PM	#233
teetertotter CASA Volunteer Join Date: Jan 2016 Location: Janesville, WI Posts: 145	Welcome Kevin... You might try here: https://www.audioasylum.com/index.htm Last edited by teetertotter; 02-17-2018 at 04:26 PM..