High Def Forum - Your High Definition Community & High Definition Resource

High Def Forum - Your High Definition Community & High Definition Resource (https://www.highdefforum.com/index.php)
-   Computers/HTPCs (https://www.highdefforum.com/computers-htpcs-44/)
-   -   Understanding Moninfo modelines... (https://www.highdefforum.com/computers-htpcs/5952-understanding-moninfo-modelines.html)

easedrop 03-11-2005 09:16 PM

Understanding Moninfo modelines...
 
Ok so I am starting to get a hang on how I am going to have to get the 1080i working, but now I am stuck on how to configure the modeline suggested in moninfo into powerstrip, i tried just matching the numbers by similar value, but nothing in the custom resolution screen seems right. Can anyone lend a hand on how to do this?

Here are my suggested resolutions, I made the one i'm trying to figure out bold.

Timing characteristics
VESA GTF support............ Not supported
Horizontal scan range....... 15-46kHz
Vertical scan range......... 59-61Hz
Video bandwidth............. 80MHz
Extension blocks............ 1
Timing recommendation #1.... 1920x540 at 60Hz
Modeline................ "1920x540" 74.250 1920 2008 2052 2200 540 542 547 562 +hsync +vsync
Timing recommendation #2.... 1920x1080 at 30Hz
Modeline................ "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
Timing recommendation #3.... 720x480 at 60Hz
Modeline................ "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync
Timing recommendation #4.... 1280x720 at 60Hz
Modeline................ "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
Timing recommendation #5.... 1440x240 at 60Hz
Modeline................ "1440x240" 27.000 1440 1478 1602 1716 240 244 247 262 -hsync -vsync
Timing recommendation #6.... 1440x480 at 30Hz
Modeline................ "1440x480" 27.000 1440 1478 1602 1716 480 488 494 524 interlace -hsync -vsync
Timing recommendation #7.... 720x480 at 60Hz
Modeline................ "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync
Timing recommendation #8.... 1440x240 at 60Hz
Modeline................ "1440x240" 27.000 1440 1478 1602 1716 240 244 247 262 -hsync -vsync
Timing recommendation #9.... 1440x480 at 30Hz
Modeline................ "1440x480" 27.000 1440 1478 1602 1716 480 488 494 524 interlace -hsync -vsync

SpHeRe31459 03-12-2005 04:38 AM

All you have to do is copy and paste the Modeline into PowerStrip's Custom Resolution builder. So you copy this from the 1080i timing recommendation:

Code:

"1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
http://htpcnews.com/images/powerstri...stecircled.JPG
and then paste it in using the little paste icon.

Mistoffeles 11-29-2005 01:49 PM

Tried this, but PowerStrip won't let me enter values this high.

The only difference I have from the screenshot above is that Interlaced is checked.

rbinck 11-29-2005 02:33 PM

Don't try to enter the values as they will interact with each other. Copy the modeline to the clipboard by highlighting and then either right click, copy or control-c. Then paste the contents of the clipboard using the paste icon into powerstrip. The righthand one circled.


All times are GMT -6. The time now is 12:13 PM.

Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2004 - 2018, MH Sub I, LLC dba Internet Brands