High Def Forum
Thank you for visiting. This is our website archive. Please visit our main website by clicking the logo above.

Two H-20 Install, with two SD Installs with 5LNB Dish

rbinck
03-20-2006, 12:19 PM
I am due for a Direct Install on 31th of Month.I have already bought two H-20 Receivers fromCostco. They are bringing two SD Receivers. is your diagram in a early post, what I will be looking at?.
I'm not sure which diagram you are referring to, but I don't recall making one for the 5LNB dish.

Basically you will need to run the four coax cables from the dish to a 4x8 multiswitch that is rated for the new 5LNB dish. Go to this link: The New AT9 Dish (http://www.highdefinitionblog.com/?p=129) and watch the videos. It will go over everything needed for the new 5LNB dishes.

Also you need to run your OTA antenna completely separately as the diplexers will not work with the new system.

lemoncadillac
03-21-2006, 05:38 PM
mistake