High Def Forum
Thank you for visiting. This is our website archive. Please visit our main website by clicking the logo above.

wd-62628

rayesta
01-31-2010, 01:46 AM
I also have green blinking light but my code shows up as 32 lamp cover open my question is how to determine which lamp cover is it talking about and location of it

brentburrows1
02-08-2010, 11:56 AM
It would be refering to the lamp cover on the back of the tv that you access to change the lamp. These tv's have a micro switch that indicates whether or not that door is open. If you lamp cover is infact on, and in position, your switch may have gone out. I would unscrew the two screws that hold the lamp cover on and make sure that the tab on the lamp cover itself if making contact with the switch when installed.

rayesta
02-10-2010, 07:50 PM
i since have determined that this was the problem, remedied that ghost now have another screen lights for twenty seconds or so then goes blank with red led solid replaced balast, same symptoms. I need to know how to troubleshoot thermistor, i read 0 ohms on fluke 27 i think there should be more than this led error code is 34 lamp abnomality, any help would be appreciated