View Single Post
Old 07-21-2005, 07:15 AM   #66  
Orko
CRT 4 life
 

Join Date: Jul 2005
Posts: 14
Default

Hi there, I have been trying to get my New HDTV to work, and followed some of the tips i found in this thread, but they didnt work

Video Card: GeForce Ti4200 - 128mb 4xAGP
HDTV: Samsung TX-P2775H 27" DYNAFLAT HDTV WITH ATSC TUNER TV
Connections: DVI-D
Driver: Latest, Forceware 77.72

Now i tried using Monoinfo to get my specs, and this is what came out:

Monitor
Windows description......... Plug and Play Monitor
Manufacturer description.... SAMSUNG
Manufacturer................ Samsung
覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Plug and Play ID............ SAM0132
Serial number............... n/a
EDID data source............ I2C bus (real-time)
覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Manufacture date............ 2004, ISO week 9
EDID revision............... 1.3
Display type and signal..... Digital
Sync input support.......... n/a
Screen size................. 690 x 410 mm (~33")
Power management............ n/a

Color characteristics
Display gamma............... 2.20
Red chromaticity............ Rx 0.640 - Ry 0.330
Green chromaticity.......... Gx 0.300 - Gy 0.600
Blue chromaticity........... Bx 0.150 - By 0.060
White point (default)....... Wx 0.313 - Wy 0.329

Timing characteristics
VESA GTF support............ Not supported
Horizontal scan range....... 15-46kHz
Vertical scan range......... 59-61Hz
Video bandwidth............. 80MHz
Extension blocks............ 1
Timing recommendation #1.... 1280x720 at 60Hz
Modeline................ "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
Timing recommendation #2.... 720x480 at 60Hz
Modeline................ "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync
Timing recommendation #3.... 1920x540 at 60Hz
Modeline................ "1920x540" 74.250 1920 2008 2052 2200 540 542 547 562 +hsync +vsync
Timing recommendation #4.... 1920x1080 at 30Hz
Modeline................ "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync

Standard timings supported
720 x 480 at 60Hz - Samsung
1280 x 720 at 60Hz - Samsung
1920 x 540 at 60Hz - Samsung
1920 x 1080 at 30Hz - Samsung


In one of the first posts, rbinck had shown how to enter the specific timing settings based on the info that Monoinfo gave. I tried to follow that lead and type them into my video card's settings. My card just said, that i could not change the settings, and nothing happened. Now im wondering if i did something wrong, or if i have to follow a different procedure in order to get it to work with an Nvidia card.
Orko is offline   Reply With Quote