Re Switch 44 function

Hydromn · 10-22-2008, 06:28 AM

I currently have a sw44 which has two of its four out cables to my BEV 9200 to feed one hd and one sd TV.

Cable 3 goes to an old BEV 2700 and 4 is not in use.

I am considering replacing the 9200 as I want to go full hd for all of my Tvs.

Can I take all four "out " lines from the Sw 44 and feed four separate single hd receivers (6100s) .

Any suggestions would be greatly appreciated.

SJ44 · 10-22-2008, 10:24 PM

Yes, it will work.

Hydromn · 10-23-2008, 10:48 AM

Thanks for the quick reply. I have since tried hooking a 6100 to the unused line 4 and found it to work fine.

10-22-2008, 06:28 AM	#1
Hydromn Old It Guy Join Date: Dec 2007 Location: Ontario, Canada Posts: 6	Re Switch 44 function I currently have a sw44 which has two of its four out cables to my BEV 9200 to feed one hd and one sd TV. Cable 3 goes to an old BEV 2700 and 4 is not in use. I am considering replacing the 9200 as I want to go full hd for all of my Tvs. Can I take all four "out " lines from the Sw 44 and feed four separate single hd receivers (6100s) . Any suggestions would be greatly appreciated.

10-22-2008, 10:24 PM	#2
SJ44 Retired video tech Join Date: Jul 2008 Location: Quebec, Canada Posts: 185	Yes, it will work. __________________ Sony SXRD KDS-R60XBR1, Yamaha RX-V357, Bell 6100

10-23-2008, 10:48 AM	#3
Hydromn Old It Guy Join Date: Dec 2007 Location: Ontario, Canada Posts: 6	Sw44 use Thanks for the quick reply. I have since tried hooking a 6100 to the unused line 4 and found it to work fine.

Similar Threads to Re Switch 44 function
Thread	Thread Starter	Forum	Replies	Last Post
Dish VIP211 Check Switch	coastie	DISH Network Forum	11	01-30-2008 06:50 PM
Expressvu 9200 switch error	swervinmervin	Canadian Providers	2	10-21-2007 01:12 AM
Passive Remote A-B Switch ??	JHB50	Local HDTV Info and Reception	1	03-27-2007 06:29 PM
Switch here & a switch there!	5RON5	DISH Network Forum	6	05-30-2006 07:22 PM
HDMI Switch: Insiders Guide	sus	Cables & Connections	1	11-13-2005 06:08 PM