Help with sw44

gillis1978 · 12-16-2007, 02:26 PM

i just got another hi def bell rec. so i have 2 6100 and one 5900..
I can get all chanels on the 5900 and only some channels on the 6100's
here is my set up.
2 wires from both lnb's into sw44. one from each lnb into dish 1 and 2. then i have dish one with power inserter into 5900 and 2 and 3 to the 6100, when i do check switch it's
91 - 91 - 82 - 82
even - odd - even - odd
it's recognizes the sw44 but says error in conncections?
signal strength is 98
when i change transponder by one it says 95 but wrong sat trying to get the bell 91...

CAN ANYONE HELP?

gillis1978 · 12-16-2007, 06:36 PM

does anyone have a diagram of what wires from each lnb go into sw-44.. ?
when you do check switch does anyone know what it is suppose to read?
what satelite should i be picking up on the high def recievers? 82 or 91?
should i be picking either of them up on all transponers?

DSNY FN · 12-19-2007, 02:20 PM

I believe that the line 1 with the power adapter for it needs to go to one of the 6100's for us it needs to run to our 9200 and all other lines to our 6100's. As for lines from teh SW44 We have line 1 as a 91 and line 2 as an 82 and vice versa down the switch.

12-16-2007, 02:26 PM	#1
gillis1978 What is HD? Join Date: Dec 2007 Location: halifax Posts: 2	Help with sw44 i just got another hi def bell rec. so i have 2 6100 and one 5900.. I can get all chanels on the 5900 and only some channels on the 6100's here is my set up. 2 wires from both lnb's into sw44. one from each lnb into dish 1 and 2. then i have dish one with power inserter into 5900 and 2 and 3 to the 6100, when i do check switch it's 91 - 91 - 82 - 82 even - odd - even - odd it's recognizes the sw44 but says error in conncections? signal strength is 98 when i change transponder by one it says 95 but wrong sat trying to get the bell 91... CAN ANYONE HELP?

12-16-2007, 06:36 PM	#2
gillis1978 What is HD? Join Date: Dec 2007 Location: halifax Posts: 2	diagram? does anyone have a diagram of what wires from each lnb go into sw-44.. ? when you do check switch does anyone know what it is suppose to read? what satelite should i be picking up on the high def recievers? 82 or 91? should i be picking either of them up on all transponers?

12-19-2007, 02:20 PM	#3
DSNY FN High Definition is the definition of life. Join Date: Oct 2006 Location: London Ont Canada Age: 40 Posts: 2,273	I believe that the line 1 with the power adapter for it needs to go to one of the 6100's for us it needs to run to our 9200 and all other lines to our 6100's. As for lines from teh SW44 We have line 1 as a 91 and line 2 as an 82 and vice versa down the switch. __________________ HD IS THE ONLY WAY Bedroom setup Viewsonic N2752w Xpressvue 6100 Toshiba HD A2 Harmony 520 Livingroom setup Samsung HL-S5687WX Toshiba HD-DVD XA2 Xpressvue HD PVR Denon 3801 PSB Full surround Harmony 880 Nintendo GC Nintendo Wii (this console rocks) Mario Kart Wii friend code 4768-8283-5991

Similar Threads to Help with sw44
Thread	Thread Starter	Forum	Replies	Last Post
Aligning Sat Dish for Expressvu 9200	pcheenan	Canadian Providers	6	08-18-2005 09:44 AM