![]() |
|
|||||||
Cables & Connections Discuss and learn about HDMI Cables, DVI Cables, HDTV Cable Connections and more! ![]() |
![]() |
|
|
|
|
Thread Tools |
|
|
#1 |
|
My plasma is High Def.
Join Date: Jul 2012
Location: Nebraska
Posts: 8
|
Hey all, had to post 5 times in order to post a link in this thread. That's done, now time for the real question.
I have a simple home network setup with a patch panel, a switch, modem and a wireless router etc.. Now my question is this, I'm looking to purchase this: http://www.monoprice.com/products/pr...seq=1&format=2 Will this work through the patch panel, switch, and internet signal to reach the garage TV? Is there any sure way to know this will work without actually buying it and trying it? Thank you, Derik |
|
|
|
|
|
#2 |
|
High Definition is the definition of life.
Join Date: Apr 2012
Posts: 52
|
That should work though your patch panel but would doubt it would work through your router/switch/internet.
|
|
|
|
|
|
#3 |
|
My plasma is High Def.
Join Date: Jul 2012
Location: Nebraska
Posts: 8
|
Ok, so if I were to disconnect the garage ethernet line that runs into to back of the patch panel and plug it into the front of the patch panel where the ethernet line comes from the Main TV with the HDMI signal on it that should most likely work?? Since that connection does not jump over to the switch which has the internet?
|
|
|
|
|
|
#4 |
|
Beer: it does a body good
Join Date: Jan 2006
Location: PCB, FL
Posts: 1,697
|
Keep everything wired to the patch panel the way you had it. Just use a patch cable to connect the two together.
|
|
|
|
|
|
#5 |
|
My plasma is High Def.
Join Date: Jul 2012
Location: Nebraska
Posts: 8
|
That would be make more sense! and a lot easier! Thank you Keg! I think it's going to be worth a shot!
|
|
|
|
|
|
#6 |
|
What is HD?
Join Date: Jul 2012
Posts: 3
|
Just use patch cable to connect between two together, sure it will work with patch panel and internet signal, not sure for switch
|
|
|
|
|
|
#7 |
|
My plasma is High Def.
Join Date: Jul 2012
Posts: 8
|
I would recommend checking KVMSwitchTech. I am an installer and
use them for all my HDMI Splitter and HDMI Extender needs. |
|
|
|
|
|
#8 |
|
What is HD?
Join Date: Aug 2012
Posts: 1
|
It should work fine through your patch panel. I know that you can't use Cat5 HDMI Extender products with routers.
|
|
|
|
|
|
#9 |
|
What is HD?
Join Date: Nov 2012
Posts: 1
|
The set up will work through a patch panel but you can't use any hubs or routers or switchers in conjunction with the extender. If you are looking for a reliable HDMI Extender solution I would recommend checking KVMSwitchTech. They have long range units up to 330ft that work great.
|
|
|
|
|
|
#10 |
|
What is HD?
Join Date: Nov 2012
Posts: 1
|
You can use an extender with a patch panel but you cannot connect it to any hubs or routers. If you are looking for a long range HDMI Extender solution that supports 1080p the you should go for ( Part # HDMIEXT3D-100M ).
|
|
|
|
|
|
#11 |
|
My plasma is High Def.
Join Date: Dec 2012
Posts: 5
|
good idea,Keep everything wired to the patch panel the way you had it. Just use a patch cable to connect the two together.
|
|
|
|
| Sponsored Links |
| ||||||
![]() |
| Thread Tools | |
|
|