lnb and switch problem

i am trying to receive satellites 110 119 and 82, i am usig two dishes to accomplish this one has a dish pro lnb with two wires coming out of it and the other dish has for four wires coming out of it i have tryed using adp-34 switch and i cannot get all three satellites i also tryed hooking up everything up to a diseq. switch with the same results can some tell me what lnb and switch i need to make this work?

For 1 TV you'll need 2 x SW21 switch. Connect as follows:

- Sat 110/119 dish > Connect 1 line from each LNB to SW21 (A) located at dish.
- Connect output of this SW21 (A) to input of second SW21 (B).
- Sat 82 dish > Connect 1 line from LNB to other input of SW21 (B).
- Run output of SW21 (B) to Receiver
- Run Switch setup test under installation menu (you may have to do this a few times)

For second TV > Repeat using secondary ports on all three LNBs (you'll need 2 more SW21s)