I realize it's been months since you posted this question, but I thought I'd answer anyway...
On my TimeWarner DVR I can change that setting by choosing settings on the remote, then devices, and then scroll through the menu until I find that audio output.
Quote:
Originally Posted by towman
Hello All,
I got a problem connecting my 8300HD with a HDTV via component cable (YPbPr).
Currently I'm connecting the two devices with HDMI cable and everything works correctly, however I got a new device and I like to use the HDMI for that (already using a third device with HDMI so there goes the 2 HDMI connector on my TV).
I connected the 8300HD with the component cable to the HDTV but I'm only getting sound (In the settings menu I set digital audio to "Other").
Here is what I did:
1. Unplugged the power from the 8300HD
2. Unplugged the HDMI
3. Connected the component cable (correctly, checked and tried 3 different cables too)
4. Waited until correct time displayed
5. Turned on the TV (selected the correct Component Input)
6. Turned on the 8300HD
No picture, only sound.
Then I tried the setup wizard (Guide and Info button at the same time...), without the HDMI plugged in (still no picture, however when I plug the HDMI back in, it works correctly).
Do I have a faulty component connector on the back of my 8300HD?
Is there a "secret" setting where one can change the video output from HDMI to component?
Thank you your help!
|