High Def Forum - Your High Definition Community & High Definition Resource - View Single Post

**PFC5** · 11-21-2008, 02:26 PM

Just simply MOVE the 360's component cables cables physically further away from ALL power cables going to the 360 or any other device near it. See if while moving the component cables away if it changes the static lines on the screen too.

You could also make sure that the 360 is plugged into the same outlet as the display to eliminate any groung loop issues.

11-21-2008, 02:26 PM	#20
PFC5 Super Moderator Join Date: May 2005 Posts: 28,385	Just simply MOVE the 360's component cables cables physically further away from ALL power cables going to the 360 or any other device near it. See if while moving the component cables away if it changes the static lines on the screen too. You could also make sure that the 360 is plugged into the same outlet as the display to eliminate any groung loop issues. __________________ Denon AVR-887 Klipsch RP-5 Pwred Towers (mains) (525 watts peak each 12"Subs) All Klipsch RC-25(ctr),(2)SS1(surr),(2)SS1(rearSurr) Toshiba (2)HD-A20,PS3,BD35 For SACD/DVD-A Samsung HD-841 Panny 50pz80u plasma SETTINGS RCA HD50LPW162 50"DLP w/HD2+ SA 3250HD 47" LCD+Yamaha5790+HD-A1(bedroom) Harmony 680 + (2) 670s (amazing remote/support) Game room with Onkyo receiver & B&W Speakers The_Cable_Game Take the high ground and be happier