Quote:
Originally Posted by kregers
yeah, I've tried setting it to audo, pcm and even downgrade ?, regardless, I've tried all 3.
|
You set the Digital Out to HDMI?
Set “Digital Out SPDIF” if using optical cable or “Digital Out HDMI" if using HDMI.
From the Manual:
No sound.
Is the audio cable disconnected? ( page 22)
. Is the volume of the device turned down to the minimum level? Check the volume.
. Switch the audio input of the device connected by the audio cable to the input from the
player.
. Set “Digital Out SPDIF” or “Digital Out HDMI” ( page 53) properly in accordance with
the connected device and connection procedure.
. Change the output resolution ( page 23) so that sound can be heard.
. If using the optical digital output for a Dolby Digital Plus, Dolby TrueHD, DTS-HD or DTS
soundtrack, be sure your AV receiver or processor is set to use the input connected to
your player and is set to decode a DTS bitstream. If your AV receiver or processor does
not support DTS, select PCM output on the player ( page 53).