Quote:
Originally Posted by squeals99
alright well we just got a new tv to replace the old school tube tv in our living room that is a 40'' samsung flat screen HDTV.... the big screen in the basement, along with the little flat screen are hooked up to the high def, and the tv that was in the living room isnt, but the old tv was hooked up to satellite, but not the high def part.... so we are wanting to change the signal from the bedroom tv, which is the small flat screen to the living room, the big high def, and the receiver is in the basement on the big screen tv.... so basically we are wanting to change from high def in the basement, high def in the bedroom, and standard def in the living room to high def in the basement, high def in the living room, and standard def. in the bedroom
is this possible to do, and how do i go about changing the signal?
also, we have two remotes that control the high def, one for each of the tvs that are high def
thanks in advance
|
My first thought after reading this was, HUH? Then I read it again. LOL
Do you have an HD receiver in your bedroom right now? That get's you your HD in the Bedroom, small flat screen? is there a Standard Def receiver in the living room? Or do you use a second output from a HD receiver to get signal to it?
If you have 3 receivers, one in each room, all you should have to do is move the bedroom receiver into the living room. And the living room one into the bedroom.
If you only have 2, then you have to move the sat signal at the switch. That might be tougher, unless you have a cable break out box that you can change.