High Def Forum - Your High Definition Community & High Definition Resource - View Single Post

sbacchus · 01-05-2005, 10:21 PM

hi all,
i'm in the process of installing an OTA antenna (CM4228/CM7777) to work with my dish 921. my current setup is one port coming out of a DP44 switch and coming into a DP plus separator, each output of which goes into the 921's inputs.

if i put a multiplexor after the DP44 switch and then another one right before the separator will i be able to run my antenna signal on the same cable? i was wondering if the combination of the DP44/separator might not cause a problem.

01-05-2005, 10:21 PM	#1
sbacchus What is HD? Join Date: Jan 2005 Posts: 1	install question hi all, i'm in the process of installing an OTA antenna (CM4228/CM7777) to work with my dish 921. my current setup is one port coming out of a DP44 switch and coming into a DP plus separator, each output of which goes into the 921's inputs. if i put a multiplexor after the DP44 switch and then another one right before the separator will i be able to run my antenna signal on the same cable? i was wondering if the combination of the DP44/separator might not cause a problem.