Hi everyone.
I'm trying to install the bell 6000 hd receiver.I ran a line from both 91 degree and 82 degree to a sw21x switch that I installed to the dish.
From the switch to the sw44 switch inlet 1B and out #1 outlet to the power inserter. Then finally to the receiver. I aquirred a signal on the 91 degree @ 88% but the 82 degree is in the red saying that it is the wrong satellite.
I also ran a switch test and it says I am connected to one satellite.
The sd signal works great but the hd signal is missing.
Do I have a switch problem or need to align the dish more?